> Complete documentation index: [llms.txt](/llms.txt). Markdown versions of all pages are available by appending `.md` to page URLs.

# Supported Devices

> Which Binho software works with which adapter: Mission Control, PyCosmicSDK, CosmicSDK, pyOCD and the legacy packages, for the Atira, Pulsar, Supernova and Nova.

Find the adapter's column to see which software works with it.

## Current software

| Software | Binho Atira | Binho Pulsar | Binho Supernova | Binho Nova |
| -------- | ----------- | ------------ | --------------- | ---------- |
| [Mission Control 3](/software/mission-control/), desktop app | Yes: MCU Programmer and MCU Debugger | Yes | Yes | No |
| [Mission Control 3](/software/mission-control/), web app ([mc3.binho.io](https://mc3.binho.io)) | Desktop app only | Yes | Yes | No |
| [PyCosmicSDK](/software/pycosmicsdk/) (Python) | Yes, 1.7.0 and later | Yes | Yes | No |
| [CosmicSDK](/software/cosmicsdk/) (C, C++) | Yes, 1.7.0 and later | Yes | Yes | No |
| [pyOCD](https://pyocd.io) | Yes: flashing the target | No | No | No |
| [dfu.binho.io](https://dfu.binho.io) (firmware update in the browser) | See [Atira Firmware](/hardware/atira/firmware/) | Yes | Yes | No |

## Legacy software

These packages still work but get no new features.

| Software | Binho Atira | Binho Pulsar | Binho Supernova | Binho Nova |
| -------- | ----------- | ------------ | --------------- | ---------- |
| [Mission Control 2](/software/legacy/mission-control-2/) | No | No: not on firmware 4.x | No: not on firmware 4.x | Yes |
| [Nova SDK](/software/legacy/nova-sdk/) (`binho` Python package) | No | No | No | Yes |
| [BMC C++ SDK](/software/legacy/c-sdk/) | No | No | Yes | Yes |
| [SupernovaController](/software/legacy/supernovacontroller/) (Python) | No | No | Yes, firmware 3.x only | No |
| [binhosupernova](/software/legacy/binhosupernova/) (Python) | No | No | Yes | No |
| [binhopulsar](/software/legacy/binhopulsar/) (Python) | No | Yes | No | No |
| [Bridge 1.1 API](/software/legacy/bridge-11-api/) | No | No | Yes | No |

:::note
Mission Control 2.16.1 and earlier do not work with Supernova or Pulsar firmware 4.x. Use Mission Control 3 for those adapters.

:::

## Running Nova software on a Supernova or Pulsar

A Supernova or Pulsar on firmware 4.4.0 or later can emulate the Nova's ASCII protocol on its virtual COM port, so existing Nova host software can talk to it. See [Nova Compatible Mode](/guides/usb-interfaces/usb-cdc-operating-modes/nova-compatible-mode/) and the [ASCII Command Set](/hardware/nova/ascii-command-set/).

## Where to get each one

Download links and current versions: [Software Releases](/releases/).